Sending A Fax Manually; Sending A Fax At The End Of A Conversation; Out Of Memory Message - Brother MFC-3360C User Manual

Sending a fax manually

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode
b
Load your document.
c
Pick up the handset of the machine or
press Hook/Hold and listen for a dial
tone.
d
Dial the fax number you want to call.
e
When you hear the fax tone, press
Mono Start or Colour Start.
f
Replace the handset.
Sending a fax at the end of a
conversation
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Make sure you are in Fax mode
c
Load your document.
d
Press Mono Start and Colour Start.
e
Replace the handset.

Out of Memory message

5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
.
while scanning a subsequent page, you will
have the option to press Mono Start to send
the pages scanned so far, or to press
Stop/Exit to cancel the operation.
Note
• If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 25.)
• To clear Out of Memory message
please see Turning off Remote Fax
Options on page 51, Printing a fax from
the memory on page 32 and Checking
and cancelling waiting jobs on page 26.
5
.
Sending a fax
5
5
27