Brother MFC-3360C User Manual page 99

Brother user's guide mfc-3360c
Hide thumbs Also See for MFC-3360C:
Table of Contents

Advertisement

Error Message
Cause
One or more of the ink cartridges is
Ink Empty
empty. The machine will stop all
print operations. While memory is
available, black and white faxes will
be stored in the memory. If a
sending machine has a colour fax,
the machine's
that the fax be sent as black and
white. If the sending machine has
the ability to convert it, the colour
fax will be stored in the memory as
a black and white fax.
The print head is too cold.
Low Temperature
One or more of the ink cartridges
Near Empty XX
are running out of ink. If a sending
machine has a colour fax, the
machine's
the fax be sent as black and white.
If the sending machine has the
ability to convert it, the colour fax
will be received into memory as a
black and white fax.
There is no incoming call history.
No Caller ID
You have not received any calls,
you have not activated the Caller ID
feature on your machine, or you
have not subscribed to the Caller ID
service from your telephone
company.
An ink cartridge is not installed
No Cartridge
properly.
The machine is out of paper or
No Paper Fed
paper is not properly loaded in the
paper tray.
The paper is jammed in the
machine.
The number you dialed does not
No Response/Busy
answer or is busy.
You tried to access a Speed Dial
Not Registered
number that is not programmed.
'
'
handshake
will ask
'
'
handshake
will ask that
Troubleshooting and Routine Maintenance
Action
Replace the ink cartridges. (See Replacing the
ink cartridges on page 94.)
Allow the machine to warm up.
Order a new ink cartridge.
If you want to use the Caller ID feature call your
telephone company. (See Caller ID (For
Singapore and Hong Kong) on page 41.)
Take out the ink cartridge and put it in again
seating it properly. (See Replacing the ink
cartridges on page 94.)
Do one of the following:
Refill the paper in the paper tray, and then
press Mono Start or Colour Start.
Remove the paper and load it again and then
press Mono Start or Colour Start.
See Printer jam or paper jam on page 91.
Verify the number and try again.
Set up the Speed Dial number. (See Storing
Speed-Dial numbers on page 48.)
89

Advertisement

Table of Contents
loading

Table of Contents