Additional Sending Operations; Sending A Fax Manually; Dual Access (Monochrome Only); Broadcasting (Monochrome Only) - Brother DCP-J125 User Manual

Chapter 3
Additional sending
operations

Sending a fax manually

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
Note
(MFC-J410 and MFC-J415W only)
To send a multiple page fax, use the ADF.
a
Press (FAX).
b
Load your document.
c
To listen for a dial tone pick up the
handset of the external telephone.
d
Dial the fax number.
e
When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass
press 1 on the machine to send a fax.
f
Replace the handset.
8
Downloaded from ManualsPrinter.com Manuals
Dual Access
(Monochrome only)
3
You can dial a number and start scanning the
fax into memory—even when the machine is
3
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Broadcasting
(Monochrome only)
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed Dial
numbers, and up to 50 manually dialled
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a
Press
b
Load your document.
c
Press a or b to choose Broadcasting.
Press OK.
(FAX).
3
3