To Load Envelopes - Brother DCP120C - Flatbed Multifunction Photo Capture Center User Manual

To load envelopes

■
Use envelopes that weigh from 20 - 25 lb (75 - 90 g/m
■
Some envelopes require margin settings in the application. Make
sure you do a test print first.
To prevent possible damage to the feeding mechanism, do not
use the types of envelopes shown below.
DO NOT USE ENVELOPES:
■
that are of a baggy construction
■
that are embossed (have raised writing on them)
■
that have clasps on them
■
that are not sharply creased
■
that are preprinted on the inside
■
Glue
How to load envelopes
1
Before loading, press the corners and sides of the envelopes to
make them as flat as possible.
If the envelopes are 'double-feeding', put one envelope in the
paper tray at a time.
■
Rounded
flap
■
Double flap
INTRODUCTION 1 - 15
2
).
■
Triangular
flap