Packing And Shipping The Machine - Brother DCP120C - Flatbed Multifunction Photo Capture Center User Manual

Packing and shipping the machine

Whenever you transport the machine, use the packing materials that
came with your machine. If you do not pack the machine properly,
you could void your warranty.
Caution
It is important to allow the machine to 'park' the print head after a
print job. Listen carefully to the machine before disconnecting it from
the power source to ensure that all mechanical noise has stopped.
Not allowing the machine to complete this parking process may lead
to print problems and possible damage to the print head.
1
Lift the scanner cover from the right-hand side of the machine
until it locks securely into the open position.
2
Remove all the ink cartridges and attach the protective parts.
(See Replacing the ink cartridges on page 6-22.)
When attaching the protective parts,
make sure they clip into place as shown in the diagram.
Caution
If you are not able to find the protective parts, do NOT remove the ink
cartridges before shipping. It is essential that the machine be
shipped with the protective parts or the ink cartridge in position.
Shipping without them will cause damage to your machine and may
void your warranty.
6 - 16 TROUBLESHOOTING AND ROUTINE MAINTENANCE