Color Enhancement (True2Life ® ) - Brother DCP120C - Flatbed Multifunction Photo Capture Center User Manual

Color enhancement (True2Life
You can turn on the color enhancement (True2Life
more vivid images. Printing time will be slower.
1
Menu
Press
2
Press or
Set
Press .
3
Press or
Set
Press .
4
Press or
Set
Press .
—OR—
Select Off and press
If you select On, you can customize the White Balance,
Sharpness or Color Density.
5
Press or
or 3.Color Density.
Set
Press .
6
Press or
Set
Press .
7
Stop/Exit
Press
■
White Balance
This setting adjusts the hue of the white areas of an image.
Lighting, camera settings and other influences will effect the
appearance of white. The white areas of a picture may be slightly
pink, yellow or some other color. By using this adjustment you
can correct this effect and bring the white areas back to pure
white.
■
Sharpness
This setting enhances the detail of an image. It is similar to
adjusting the fine focus on a camera. If the image is not in true
focus and you cannot see the fine details of the picture, then
adjust the sharpness.
■
Color Density
This setting adjusts the total amount of color in the image. You
can increase or decrease the amount of color in an image to
improve a washed out or weak picture.
.
to select 2.PhotoCapture.
to select 5.True2Life.
to select On.
Set
, then go to Step 7.
to select 1.White Balance, 2.Sharpness
to adjust the degree of setting.
.
WALK-UP PHOTOCAPTURE CENTER
®
)
feature to print
®
)
™
3 - 11