Changing The Default Quality - Brother DCP120C - Flatbed Multifunction Photo Capture Center User Manual

1
Insert a SmartMedia
Memory Stick Pro
xD-Picture Card
Do not take out the media card while
to avoid damaging the card or data stored on the card.
2
Load your document.
3
Press
4
Press or
To change quality, press
—OR—
Black Start
Press
changing any settings.
5
Press or
To change the file type, press
—OR—
To start scanning, press
6
Press or
Black Start
Press

Changing the default quality

1
Menu
Press
2
Press or
Set
Press .
3
Press or
Set
Press .
4
Press or
Set
Press .
5
Press or
Color 150 dpi, Color 300 dpi or Color 600 dpi.
Set
Press .
6
Stop/Exit
Press
3 - 14 WALK-UP PHOTOCAPTURE CENTER
®
, CompactFlash
™
, SecureDigital
™
into your machine.
Scan
( ).
to select Scan to Card.
Set
Color Start
or
to select the quality you want.
Black Start
to select the file type you want.
Color Start
or
.
to select 2.PhotoCapture.
to select 8.Scan to Card.
to select 1.Quality.
to select B/W 200x100 dpi, B/W 200 dpi,
.
®
, Memory Stick
™
, MultiMediaCard
PhotoCapture
and go to Step 5.
to start scanning without
Set
and go to Step 6.
Color Start
or
start scanning.
™
®
,
™
or
is blinking
.