Brother DCP120C - Flatbed Multifunction Photo Capture Center User Manual page 81

DIFFICULTY
Software Difficulties
Cannot install software or print
'Device Busy'
™
PhotoCapture Center
Removable Disk does not
work properly.
Cannot access Removable
Disk from Desktop icon.
Other Difficulties
Incorrect LCD language
SUGGESTIONS
Run the Repair MFL-Pro Suite program on the CD-ROM. This program
will repair and reinstall the software.
Make sure the machine is not showing an error message on the LCD.
Difficulties
a) Have you installed the Windows
If not, do the following:
1. Disconnect the USB cable.
2. Install the Windows
Guide. After the installation the PC will be automatically restarted.
3. Wait about 1 minute after you reboot the PC, and then connect the
USB cable.
b) Take out the media card and put it back in again.
c) If you have tried "Eject" from within Windows
media card before you continue.
d) If an error message appears when you try to eject the media card, it
means the card is being accessed.
Wait a while and then try again.
e) If all of the above do not work, please turn off your PC and machine,
and then turn them on again.
(You will have to unplug the power cord of the machine to turn it off.)
Make sure you have inserted the media card into the media slot.
See How to change LCD language on page 6-10.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 6 - 9
®
2000 update?
®
2000 update. Please see the Quick Setup
®
, you must take out the