Chapter 5: Using The Utility; Section 1. Installation - Asus Mimic CX-200 User Manual

Chapter 5: Using the Utility

Section 1. Installation

1. Insert the enclosed Utility CD into the CD-ROM drive. The following menu will
show up. Click on the buttons on the left to install the programs you want.
Utility - This is a program that helps the user perform quick installation. It will
detect the current configuration and take the user through the necessary
network setup.
a. Click the Utility button to commence installation.
b. After the installation is completed, the Utility program will appear in
Windows Start
MultiMonitor - This is a windows based program designed to allow user to
control a large number of ASUS Mimic IP camera located either in a LAN or
WAN.
a. Click the MultiMonitor button to commence installation.
b. After the installation is completed, iMultiView program will appear in
Windows Start
ASUS Mimic - user manual
Utility. Click this to start the program.
All Programs ASUS
Chapter 5: Using the Utility Program
MultiMonitor.
-37-