Table of Contents
Advertisement
Click Configure to set the hours. The Administrator can set up to 4 different
Permit Hours (in 24hr format).
without saving.
Note:
The Reset button only revert the fields to initial values prior to any changes being
made. If Apply has been clicked, it will not undo the changes.
ii.
Block IP address
Blocked IP List
This allows the Administrator to block specific LAN IP address from accessing
ASUS Mimic. Enter the IP address in dotted decimal notation and click Add
Block IP. The blocked LAN IP address will be listed at the bottom.
Click Delete to remove it from the list.
2.4 Advanced Settings
This section allows the Administrator to set up some of the features available in the
server.
2.4.1 Event Notification
2.4.2 Motion Detection
ASUS Mimic - user manual
Fig.19. ASUS Mimic Permit Hours Configuration
Fig.20. Blocking LAN IP address
Click Apply to save.
Chapter 3: Web Interface
Click Close to exit
-18-
Advertisement
Table of Contents
