Network - Asus Mimic CX-200 User Manual

Choose Yes for color and No for black and white display. Black and White
display results in slightly faster FPS (Frames Per Second) video.
Camera Position
Use this option to right the image when ASUS Mimic is installed on the ceiling or
wall. Select either; 0 degree (upright), 90, 180 (upside down), or 270 degree.
Pan Control
Use this function to reverse the Pan direction.
Tilt Control
Use this function to reverse the Tilt controls, if necessary.
Note:
Always click Apply to save any changes made. Otherwise, the changes will be lost.

2.3.2 Network

This option determines ASUS Mimic Network settings.
i. IP Address
By default, the IP address acquisition is set to using DHCP.
IP Address
This determines ASUS Mimic LAN IP address.
Subnet Mask
Enter ASUS Mimic Subnet Mask. The value is normally 255.255.255.0
Gateway
This item is to set ASUS Mimic Gateway.
To learn more about the above, see Appendix C: IP address, Subnet and
Gateway
Obtain an IP address
This allows the user to choose either to set ASUS Mimic LAN IP address;
manually, using DHCP (default) or using Bootp protocol.
Note:
Click Apply to confirm. ASUS Mimic will reboot. You MUST manually enter the
NEW IP address in your Browser in order to open the Web Interface.
ASUS Mimic - user manual
Fig.12. ASUS Mimic IP Address Settings
Chapter 3: Web Interface
-13-