Chapter 2: Hardware Installation; Section 1. Installation Procedure (Without Poe Injector); Section 2. Installation Procedure (With Poe Injector) - Asus Mimic CX-200 User Manual

Chapter 2: Hardware Installation

The following details the hardware installation procedure for ASUS Mimic IP camera.

Section 1. Installation Procedure (Without PoE Injector)

Step 1:
Connect the Power Adaptor to the mini
USB port.
Step 2:
Connect the LAN cable to a router.
Step 3:
Wait a moment and the LCD will
display the IP Address, Subnet and
Gateway. Use a Browser to log into
ASUS Mimic Web Interface.
The icon on the LCD shows that
a USB camera is connected.

Section 2. Installation Procedure (With PoE Injector)

Step 1:
Connect power and LAN cable into the
PoE Data In port.
Next connect ASUS Mimic LAN cable
to the PoE Data Out port.
Step 2:
Wait a moment and the LCD will
display the IP Address, Subnet and
Gateway. Use a Browser to log into
ASUS Mimic Web Interface.
The icon on the LCD shows that
a USB camera is connected.
ASUS Mimic - user manual
Chapter 2: Hardware Setup
-4-