Forward-Facing Installation; Lap-Shoulder Belt Installation (Preferred Method) - Britax MARATHON CLICKTIGHT User Manual

BRITAX Child Safety, Inc.

Forward-Facing Installation

IMPORTANT:
forward-facing position.

Lap-Shoulder Belt Installation (Preferred Method)

1. Remove the tether
from the tether storage
compartment and retainer
tabs and place it up and
over the child seat back.
2. Place the unoccupied child
seat forward-facing on the
vehicle seat in the upright
position. Ensure that the
base of the child seat is
flat on the vehicle seat and
no more than 7.6 cm (3 in.)
of the base hangs over the
edge of the vehicle seat
(see page 26).
3. Open the CLICKTIGHT.
a. Press the dimple on
b. Rotate dial clockwise
4. Slide both the lap and
shoulder parts of the
vehicle belt into the
forward-facing belt slots.
5. Ensure the vehicle belt is
not twisted and buckle
the seat belt.
6. Remove slack from the
lap part (a), then the
shoulder part (b) of the
vehicle belt.
14
arathon CT CAN.indb 14
Do not use the anti-rebound bar in a
the CLICKTIGHT
dial.
until CLICKTIGHT
releases and lift to
open.
7.6 cm
3a
3b
6a
6b
2/20/2018 11:28:26 AM