Objective; Scope; General; Drawings And Applicable Documents - FCI OCTIS 10135748-101LF Application Specification

NUMBER
GS-20-0454
TITLE
OCTIS PLUG KIT ASSEMBLY – HYBRID, SIGNAL & POWER

2. OBJECTIVE

This specification provides information and requirements for customer application of the OCTIS Metral
HDXS OCTIS Cable Connector & cable assembly. It is intended to provide general guidance for
application process development. It should be recognized that no single process will work under all
customer applications and that customers should develop processes to meet individual needs. However, if
the process varies greatly from the recommended one, FCI cannot guarantee acceptable results.
3.

SCOPE

This specification provides information and requirements regarding application of Metral HDXS OCTIS
Cable Connector (FCI product number: 10135748-101LF, 10135750-101LF, 10135752-101LF, 10143759-
101NLF, 10143760-101NLF) into OCTIS cable assemblies.
4.

GENERAL

This document is a general application guide. If there is a conflict between the product drawings and this
specification, the drawings take precedence.
5.

DRAWINGS AND APPLICABLE DOCUMENTS

FCI product drawings and specifications are available by accessing the FCI website or contacting the FCI
Technical Service. In the event of a conflict between this specification and the product drawing, the
drawing takes precedence. Customers should refer to the latest revision level of FCI product drawings for
appropriate product details.

Product Specification GS-12-1334 (Combo), GS-12-1338 (Signal) , GS-12-1339 (Power)

Plug Kit Part Number, Hybrid - Signal & Power (Combo) connector for Octis 10135748-
101LF(Crimped type)

Plug Kit Part Number, Signal Metral HDXS connector for Octis 10135750-101LF(Crimped type)

Plug Kit Part Number, Power - Pwr Profile connector for Octis 10135752-101LF(Crimped type)

Plug Kit Part Number, 2 position Power - Pwr Profile connector for Octis 10135760-101LF (Screw
type)

Plug Kit Part Number, 3 position Power - Pwr Profile connector for Octis 10135759-101LF (Screw
type)
6.

APPLICATION REQUIREMENTS

Materials, as cable and shrink sleeves must comply with the specifications mentioned in the product
specification
7.

RECOMMENDED WIRE SIZES AND INSULATIONS

7.1 Wire Insulation Materials

Semi-rigid PVC, PVC, PE, PP is used.
Copyright FCI
Form E-3334
Rev F
TYPE
APPLICATION SPECIFICATION
Form E-3334
Rev F
PAGE REVISION
8 of 30
AUTHORIZED BY DATE
Stalin Alosius 2019-09-12
CLASSIFICATION
UNRESTRICTED
PDS: Rev :D STATUS:Released
D
Printed: Sep 18, 2019