Application Procedures; Cable Preparation For Power Profile Contact - FCI OCTIS 10135748-101LF Application Specification

NUMBER
GS-20-0454
TITLE
OCTIS PLUG KIT ASSEMBLY – HYBRID, SIGNAL & POWER
10 APPLICATION PROCEDURE
10.1

Cable Preparation for Power Profile Contact

Step 1

Strip the outer jacket. (Fig 9)

Do not cut any wire on braid
Step 2

Unweave and fold back the braid (Fig 10)

The braid should be equally distributed

No Bundles
Step 3

Cut the braid to 9mm (Fig 11)
Copyright FCI
Form E-3334
Rev F
TYPE
APPLICATION SPECIFICATION
Figure 9
Figure 10
Figure 11
Form E-3334
Rev F
PAGE REVISION
15 of 30
AUTHORIZED BY DATE
Stalin Alosius 2019-09-12
CLASSIFICATION
UNRESTRICTED
PDS: Rev :D STATUS:Released
D
Printed: Sep 18, 2019