Octis Assembly; Assembling Hybrid-Signal & Power(Combo)Connector - FCI OCTIS 10135748-101LF Application Specification

NUMBER
GS-20-0454
TITLE
OCTIS PLUG KIT ASSEMBLY – HYBRID, SIGNAL & POWER
10.4

OCTIS ASSEMBLY

10.4.1 Assembling Hybrid - Signal & Power (Combo) connector
1. Make the "cable assembly" by crimping the two terminal block assemblies & power
2. Insert the gland nut through the other end of the cable (Fig 29).
3.
cable (Fig 30)
Copyright FCI
Form E-3334
Rev F
TYPE
APPLICATION SPECIFICATION
contacts (Fig 28).
Insert the "housing sub set kit combo power/signal" through the front end of the
Form E-3334
Rev F
PAGE
24 of 30
AUTHORIZED BY
Stalin Alosius
CLASSIFICATION
UNRESTRICTED
Figure 28
Figure 29
PDS: Rev :D
REVISION
D
DATE
2019-09-12
STATUS:Released Printed: Sep 18, 2019