Table of Contents
Advertisement
Installation
Front Glass Installation
1. Ensure there are no debris or finger prints on the mirrored
glass or on the back of the front glass before you begin.
2. Secure the provided suction cup on the front glass,
ensuring it cannot be pulled off.
3. Lift the glass using the suction cup, and align the
4 mounting brackets on the front glass with the
corresponding slots on the fireplace.
4. Insert the mounting brackets into the slots and gently
release the glass so that it may drop into its final position.
5. Remove the suction cup and clean any fingerprints or
debris off the front glass with a nonabrasive glass cleaner.
!
NOTE: Do not dispose of the suction cup! Keep it in a
secure location, as it may be needed for maintenance and
service on this fireplace.
Figure 17
15
Advertisement
Table of Contents
