Table of Contents
Advertisement
Menu
Setting
Color Space
Select the color gamut from "Auto,"
"BT.709," or "BT.2020."
"Auto" is available only for the 12G-SDI
input connector, 3G-SDI input
connector, and HDMI input connector.
Screen Control menu
The Screen Control menu is used to set the image
display setting for each input.
Menu
Setting
4K Scan Size
Select the scan size for the display of
the 4K equivalent signal from "Off,"
"Mode7," or "Mode8."
HD Scan Size
Select the scan size for the HD signal
display from "Off," "Mode2" to
"Mode6."
SD Scan Size
Select the scan size for the SD signal
display from "Off," or "Mode1."
4K Zoom
Select the zoom display magnification
of video signals from "Off," "x1.2,"
"x1.5," or "x2.0."
Notes
The Zoom display is available only
for the 4K equivalent signal.
"4K Scan Size" is not available while
displaying with zoom.
Flip Pattern
Select the pattern which flips and
displays the image from "Off" or
"Rotation."
SD Aspect
Select the aspect ratio of the SD signal
display from "4:3," or "16:9."
Image Division
Set the image division of the SDI 4K
signal.
Select "2SI" to receive images of the 2
sample Interleave system. Select
"Square" to receive images of the
Square system.
HDMI Signal Format
Select the HDMI signal format from
"Standard Format," or "Enhanced
Format."
Standard Format:
Select to use for a standard HDMI
format signal.
Enhanced Format:
Select to use for a high-resolution
HDMI format signal
compatible HDMI format signal.
1) Signals in resolutions of 3840 ×
1)
or HDR-
2160 or 4096 × 2160 are listed
below:
4:4:4 RGB/YCbCr-50P/60P-8bit
signals
4:2:2 YCbCr-50P/60P-12bit
signals
4:4:4 RGB/YCbCr-25P/30P-10bit
signals
Menu
PIP / POP menu
The PIP / POP menu is used to set the display
mode for the multi-image display and for each
input.
Menu
Clipping Size
Sub Screen Position
PIP
POP
Pattern Skip
Input/Output Configuration menu
Menu
Clone Out
Format
Frame Rate
29
Setting
Notes
Images and sounds may not be
output correctly with "Enhanced
Format." In that case, select
"Standard Format."
To display the corresponding signal
with "Enhanced Format," use a
Premium High-Speed HDMI cable
within a length of 3 meters (Sony
product recommended).
Setting
The clipping size can be set when
using 2 screen-display.
HD signal:
Select from "Normal," "4:3," "5:4,"
or "V Full."
4K equivalent signal:
Select from "Normal" or "V Full."
Note
"V Full" is applied to the main/sub
screen of POP1 for 2 screen-display.
Sets the sub screen position for the
multi-image display (PIP).
Sets the sub screen position for the
multi-image display (POP).
Sets the pattern that is skipped when
changing the displaying pattern by
pressing the PIP/POP button on the
front panel or the Foot Switch while
displaying multi-image display.
Set to "Not Skip" or "Skip" for the PIP1,
PIP2, POP1, or POP2 pattern.
Setting
Select the signal format for clone out
(SDI signal) from "3840×2160" or
"1920×1080."
Select the frame rate for clone out (SDI
signal) from "60Hz" or "50Hz."
When "60Hz" is selected, clone out
(SDI signal) is output at 59.94 Hz.
Advertisement
Table of Contents
