Table of Contents
Advertisement
Menu
Setting
Remote
Remote Mode
Sets the remote function when the
REMOTE connector is connected to the
optional Foot Switch FS-24.
Off:
Disables the remote function.
Port A/B:
Switches between PORT A and
PORT B.
PIP/POP:
Switches between the single-image
display and multi-image display
(PIP1/PIP2/POP1/POP2).
Flip Pattern:
Switches the flip pattern between
"Off" and "Rotation."
A.I.M.E.:
Switches the A.I.M.E. setting
between "Off" and "On."
Ethernet Setting
Sets the Ethernet.
IP Address:
Sets the IP Address.
Subnet Mask:
Sets the Subnet Mask.
Default Gateway:
Sets "On" or "Off" of the Default
Gateway.
Address:
Sets the Default Gateway.
Save:
Saves the confirmed setting.
Cancel:
Returns to the previous setting
from the confirmed setting.
Custom Button
Assigns the function to the CUSTOM 1,
CUSTOM 2 or CUSTOM 3 button on the
front panel, and can set the following
functions to on or off.
No Setting
Scan Size
4K Zoom
Flip Pattern
POP Sub Screen Position
Gamma
Mono
Contrast
Brightness
Chroma
Phase
Clone Out Format
AUX IN
Panel Display
Backlight
Adjusts the brightness of the display. A
higher setting increases the brightness
of the display, and a lower setting
darkens the display.
A.I.M.E. Setting
NR
Sets a noise reduction level of an
image when the A.I.M.E. function is
activated. A higher setting increases
the noise reduction level.
Monitor Information
Software Version
Displays the software version.
Initial Setup menu
The Initial Setup menu is used to make the basic
settings to use the unit.
Menu
Language
Port A Input Select
Port B Input Select
Pattern Skip
PIP / POP
PIP Sub Screen
Position
POP Sub Screen
Position
PORT A HD
Clipping Size/
PORT B HD
Clipping Size
Custom Button
32
Setting
You can select the menu or message
language from the following
languages.
English: English
: Chinese
: Japanese
Italiano: Italian
: Spanish
Deutsch: German
: French
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT A button.
Set to "Not Skip" or "Skip" for the 12G-
SDI, 3G-SDI, Display Port, HDMI, DVI-D
connector.
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT B button.
Set to "Not Skip" or "Skip" for the 12G-
SDI, 3G-SDI, Display Port, HDMI, DVI-D
connector.
Sets the pattern that is skipped when
changing the displaying pattern by
pressing the PIP/POP button on the
front panel while using multi-image
display.
Set to "Not Skip" or "Skip" for the PIP1,
PIP2, POP1, or POP2 pattern.
Sets the sub screen position for the
multi-image display (PIP).
Sets the sub screen position for the
multi-image display (POP).
Select the clipping size of the HD
signal from "Normal," "4:3," "5:4," or "V
Full" when displaying the multi-image
display.
Assigns the function to the CUSTOM 1,
CUSTOM 2 or CUSTOM 3 button on the
front panel, and can set the following
functions to on or off.
No Setting
Scan Size
4K Zoom
Flip Pattern
POP Sub Screen Position
Gamma
Mono
Contrast
Brightness
Chroma
Phase
Clone Out Format
AUX IN
Advertisement
Table of Contents
