Alert Annunciation (Aa Alarm) - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748 Rev: 1
14.2.1.5
14.2.1.6
14.2.1.7
14.2.2
Operating Instructions Fire alarm system EBL512 V2.3.x
ZONE: 123
Disable zone: 000
Write zone number and press "A". If more zones are to be disabled,
repeat the procedure.
Re-enable zone (X5)
ZONE: 123
Re-enable zone
Press "A". E.g.:
ZONE: 123
Re-enable zone: ZZZ
This is a list of disabled zones. Scroll to or write the wanted zone
number and press "A". If more zones are to be re-enabled, repeat the
procedure.
Disable / Re-enable control (X6)
ZONE: 123
Disable/Re-enable control
Press "A". E.g.:
ZONE: 123
Dis(=0) or re-en(=1) control? 1
To disable, press "0" and "A". (To re-enable, press "1" and "A".). For
more information, see chapter "Disable / Re-enable all control, exting.
and ventilation outputs (H2/B8), page 85.
Disable / Re-enable alarm devices (X7)
ZONE: 123
Disable/Re-enable alarm dev. ACCEPT?
Press "A". E.g.:
ZONE: 123
Dis(=0) or re-en(=1) alarm dev?1 ACCEPT?
To disable, press "0" and "A". (To re-enable, press "1" and "A".). For
more information, see chapter "Disable / Re-enable alarm devices
(H2/B9), page 86.

Alert annunciation (AA alarm)

Indications, print-outs, actions etc. as for a normal fire alarm except
the c.i.e. output for routing equipment (fire brigade tx), which will
not be activated. An AA alarm is also indicated by the LED "Fire
brigade tx delay" (L16). The AA alarm has to be acknowledged
within an acknowledge time and reset within and an investigation
time, otherwise the output(s) for routing equipment (fire brigade tx)
will be activated. See EBL512 Planning Instructions for more
37
LAST: 789 No.: 003
LAST: 789 No.: 003
ACCEPT?
LAST: 789 No.: 003
LAST: 789 No.: 003
ACCEPT?
LAST: 789 No.: 003
LAST: 789 No.: 003
LAST: 789 No.: 003
ACCEPT?
X5
ACCEPT?
X6
ACCEPT?
X7