Safety And Instructional Decals - Exmark 135-0192 Operator's Manual

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
135-0990
1. Spread pattern-heavy
1. Cutting/dismemberment hazard—keep away from moving
parts.
decal135-0990
2. Spread pattern-light
126-4994
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
Impeller Setting Display
1. Impeller switch-Off
2. Impeller switch-Slow
2. Warning—do not use the upper front locations as tie down
points, only use the specified tie-down points; see the
Operator's Manual for location.
7
Safety
decalimpellset
3. Impeller switch-On
4. Impeller switch-Fast
decal126-4994