Setting The Combi Function; Setting The Microwave Quick Start Function; Heat-Up Indicator; Fast Heat Up - John Lewis JLBICO431 User Manual

Table of Contents

Advertisement

To turns off the Microwave
function, press
If you press
the function stops. To start it again,
press
.
The maximum time of microwave functions
depends on microwave power you set:
MICROWAVE
POWER
100 - 600 W
More than 600 W

Setting the Combi function

1. Turn on a heating function.
2. Press
and do the same steps as when you
set the Microwave function.
When you use the Microwave function in
Combi mode the Microwave power cannot be
more than 600 W.
For some functions the microwave
will start as soon as the set
temperature is reached.
Functions not available for the Combi function:
Favourites, End Time, Set + Go, Heat + Hold.
Setting the Microwave Quick
Start function
1. If necessary, press
2. Press
to turn on the Quick Start function.
Each press of
adds 30 seconds to the
Duration time.
You can change the microwave
power (refer to "Setting the
Microwave function").
3. Press
to set the time for the function:
Duration. Refer to "Clock functions" chapter,
Setting the clock functions.
18
.
or open the door,
MAXIMUM TIME
90 minutes
7 minutes
to turn off the oven.

Heat-up indicator

When you turn on a heating function, the bar on
the display comes on. The bar shows that the
temperature increases. When temperature is
reached the buzzer sounds 3 times and the bar
flashes and then disappears.

Fast Heat Up

This function decreases the heat-up time.
Do not put food in the oven when
the Fast heat up function works.
To turn on the function, hold
heat-up indicator alternates.
This function is not available for some oven
functions.

Residual heat

When you turn off the oven, the display shows
the residual heat. You can use the heat to keep
the food warm.
Microwave combi-oven User Manual
for 3 seconds. The

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlbico432

Table of Contents