Automatic Switch-Off; Brightness Of The Display; Cooling Fan - John Lewis JLBICO431 User Manual

2. Set a heating function.
3. Press again and again until the display
shows: Duration.
4. Set the time.
5. Press again and again until the display
shows: Set + Go.
6. Press to confirm.
Press any symbol (except for
function: Set + Go. The set heating function
starts.
When the heating function ends, a signal sounds.
• Function Lock is on when the
heating function works.
• The menu: Basic Settings lets you
turn the function: Set + Go on
and off.

Automatic switch-off

For safety reasons the oven turns off after some
time, if a heating function works and you do not
change any settings.
(°C)
30 - 115
120 - 195
200 - 230
The Automatic switch-off does not work with
the functions: Light, Duration, End Time.

Brightness of the display

There are two modes of display brightness:
• Night brightness - when the oven is turned off,
the brightness of the display is lower between
10 PM and 6 AM.
• Day brightness:
– when the oven is turned on.
– if you touch a symbol during the night
brightness (apart from ON / OFF), the
Microwave combi-oven User Manual

Cooling fan

) to start the
When the oven operates, the cooling fan turns
on automatically to keep the surfaces of the
oven cool. If you turn off the oven, the cooling
fan can continue to operate until the oven cools
down.
(h)
12.5
8.5
5.5
display goes back to the day brightness
mode for the next 10 seconds.
– if the oven is turned off and you set the
function: Minute Minder. When the
function ends, the display goes back to the
night brightness.
25