Setting Your Favorites - Brother MFC-795CW User Manual

f
Do one of the following:
If you want to use a document as the
watermark, press Scan.
Place the document that you want to
use for the watermark on the scanner
glass and press Black Start or
Color Start.
The scanned data will be displayed
on the LCD.
If you want to adjust the degree of
Transparency for your scanned data,
press Transparency.
Press d or c to adjust the degree,
and then press OK.
Press OK again.
Go to step g.
If you want to use data from a media
card or USB Flash memory drive as
the watermark, insert the media card
or USB flash memory drive.
After Photo Capture stops blinking,
press Media.
The image will be shown on the LCD.
Press the image you want to use for
the watermark.
You can adjust the Position, Size,
Angle and Transparency of the
watermark. Press OK.
Go to step g.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while
Photo Capture is blinking to avoid
damaging the card, USB Flash memory
drive or the data stored on them.
g
Press OK to confirm to use watermark.
Load the document you want to copy.
h
Enter the number of copies you want.
i
If you do not want to change additional
settings, press Black Start or
Color Start.

Setting your favorites

You can store the copy settings that you use
most often by setting them as a favorite. You
can set up to three favorites.
a
Press (Copy).
b
Choose the copy option and settings
you want to store.
c
Press d or c to display
Favorite Settings.
d
Press Favorite Settings.
e
Press Store.
Note
Set Watermark Copy to Off or
Template when storing
Favorite Settings.
f
Press the location where you want to
store your settings for Favorite:1,
Favorite:2 or Favorite:3.
g
Do one of the following:
If you want to rename your setting,
press to delete characters. Then
enter the new name (up to
12 characters).
Press OK. (See Entering Text
on page 195.)
If you do not want to rename your
setting, press OK.
Making copies
12
12
101