Photocapture Center ® Difficulties; Network Difficulties - Brother MFC-795CW User Manual

PhotoCapture Center
Difficulty
Removable Disk does not work
properly.
Cannot access Removable Disk
from Desktop icon.
Part of my photo is missing.

Network Difficulties

Difficulty
Cannot print over the network.
148
®
Difficulties
Suggestions
1 Have you installed the Windows
1) Unplug the USB cable.
2) Install the Windows
Install MFL-Pro Suite from the CD-ROM. (See the Quick Setup
Guide.)
Download the latest service pack from the Microsoft Web site.
3) Wait about 1 minute after you restart the PC, and then connect the USB
cable.
2 Take out the memory card or USB Flash memory drive and put it back in
again.
3 If you have tried 'Eject' from within Windows
USB Flash memory drive before you continue.
4 If an error message appears when you try to eject the memory card or USB
Flash memory drive, it means the card is being accessed. Wait a while and
then try again.
5 If all of the above do not work, turn off your PC and machine, and then turn
them on again. (You will have to unplug the power cord of the machine to turn
it off.)
Make sure that you have correctly inserted the memory card or USB Flash
memory drive.
Make sure that Borderless printing and Cropping are turned off. (See Borderless
printing on page 115 and Cropping on page 115.)
Suggestions
Make sure that your machine is powered on and is online and in Ready mode.
Print a Network Configuration list (see Reports on page 89) and check the current
Network settings printed in this list. Reconnect the LAN cable to the hub to verify
that the cabling and network connections are good. If possible, try connecting the
machine to a different port on your hub using a different cable. If the connections
are good, the machine shows LAN Active for 2 seconds.
(If you are using a wireless connection or are having Network problems, see the
Network User's Guide on the CD-ROM for more information.)
®
2000 update? If not, do the following:
®
2000 update using one of the following methods.
®
, take out the memory card or