Remote Control Functions - Rinnai POLO Polocool PH26C Operation & Installation Manual

Portable room air conditioner
Table of Contents

Advertisement

Remote Control Functions

OPERATING FROM THE REMOTE CONTROL
ON / OFF Button
Press the ON/OFF orange button to turn the unit ON or OFF. The unit
will beep when the remote signal is received.  will appear in remote
display when the unit is ON.
SETTING TEMPERATURE
The operating temperature range for the unit is 17-30°C
You can increase or decrease the set temperature in 1°C increments
MODE
Displays the current Mode (Auto / Cool / Dry / Fan
AUTO OPERATION
In AUTO mode, the unit will automatically select the COOL, FAN or DRY
mode based on the set temperature.
1. Press the MODE button to select Auto mode.
2. Set your desired temperature using the Temp ▲ or Temp ▼ button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can't be set in Auto mode.
COOL OPERATION
1. Press the MODE button to select COOL mode.
2. Set your desired temperature using the Temp ▲ or Temp ▼ button.
3. Press the FAN button to select the fan speed: LOW, HIGH,or AUTO.
The first two fan speeds are indicated by increasing number of arrows in the display
eg low >>> high >>>>>> The third setting >>>>>>>>> does not change the fan speed
AUTO is marked after the third setting – the unit automatically selects the fan speed
based on the set temperature
4. Press the ON/OFF button to start the unit.
DRY (Dehumidifying) OPERATION
1. Press the MODE button to select DRY mode.
2. Set your desired temperature using the Temp ▲ or Temp ▼ button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can't be changed in Dry mode.
FAN OPERATION
1. Press the MODE button to select FAN mode.
2. Press FAN button to select the fan speed: LOW, HIGH,or AUTO.
The first two fan speeds are indicated by increasing number of arrows in the display
eg low >>> high >>>>>> The third setting >>>>>>>>> does not change the fan speed
AUTO is marked after the third setting – the unit automatically selects the fan speed
3. Press the ON/OFF button to start the unit.
NOTE: You can't set temperature in FAN mode. As a result, your remote control's LCD
screen will not display temperature.
Page 24
10

Advertisement

Table of Contents
loading

Table of Contents