Section Ii Fax; Sending A Fax; Entering Fax Mode; Faxing From The Adf - Brother MFC-680CN User Manual

5

Sending a fax

Entering Fax mode

When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in green.
The LCD shows:
Fax Resolution
Contrast
Speed Dial
Outgoing Call
FAX/TEL
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
Fax Resolution (See page 36.)
Contrast (See page 35.)
Speed Dial (See page 54.)
Outgoing Call (See page 55.)
Caller ID hist.
(UK and Ireland only) (See page 55.)
Broadcasting (See page 34.)
Delayed Fax (See page 37.)
Batch TX (See page 37.)
Real Time TX (See page 36.)
Polled TX (See page 78.)
Polling RX (See page 76.)
Overseas Mode (See page 37.)
Scan Size (See page 33.)
Set New Default (See page 38.)
Factory Reset (See page 38.)
32
5
Standard
Auto
Fax Start Press
When the option you want is highlighted,
press OK.

Faxing from the ADF

a
Press (Fax).
b
Put the document face down in the ADF.
(See Using the ADF on page 10.)
c
Enter the fax number using the dial pad
or Speed Dial.
Note
You can preview a fax message before
sending it by pressing Fax Preview.
(See How to preview an outgoing
fax on page 68.)
d
Press Mono Start or Colour Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full, it will be sent in real time.
5
5