General Setup; Power Save Mode; Putting Your Machine In Power Save Mode; Bringing Your Machine Out Of Power Save Mode - Brother MFC-680CN User Manual

3

General setup

Power Save mode

When the machine is idle, you can put the
machine into Power Save mode by pressing
the Power Save key. You can still receive
telephone calls in Power Save mode. For
further information on receiving faxes in the
power save condition, please see the table on
page 22. The delayed faxes that have been
set up will be sent. You can even retrieve
faxes using Remote Retrieval if you are away
from your machine. If you want to do other
operations, you must take the machine out of
Power Save mode.
Note
If you have connected an external
telephone or TAD, it is always available.
Putting your machine in
Power Save mode
a
Press and hold down the Power Save
key until the LCD shows
Shutting Down.
The LCD will stay on for a few seconds
before going off.
Bringing your machine out of
3
Power Save mode
a
Press the Power Save key.
The LCD shows the date and time.
Note
• Even if you have put the machine into
Power Save mode, it will periodically clean
the print head to preserve print quality.
• If you unplug the AC power cord, no
machine operations will be available.
• You can customize Power Save mode so
that, apart from automatic head cleaning,
no machine operations are available. (See
Power Save setting on page 21.)

Power Save setting

You can customize the machine's
3
Power Save key. The factory setting is Fax
Receive:On. Your machine can receive
faxes or calls even when the machine is in
Power Save mode. If you do not want your
machine to receive faxes or calls, turn this
setting to Fax Receive:Off.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
P.Save Setting.
d
Press d or c to choose Fax
Receive:Off (or Fax Receive:On).
Press OK.
e
Press Stop/Exit.
3
3
3
3
21