Additional Sending Operations; Sending Faxes Using Multiple Settings; Contrast - Brother MFC-680CN User Manual

Additional sending
operations
Sending faxes using multiple
settings
When you send a fax you can choose any
combination of these settings: resolution,
contrast, overseas mode, delayed fax timer,
polling transmission and real time
transmission.
a
Press (Fax).
The LCD shows:
Fax Resolution

Contrast

Speed Dial
Outgoing Call
FAX/TEL
b
Press a or b to choose a setting you
want to change.
c
Press d or c to choose an option.
d
Go back to b to change more settings.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
a new default on page 38.)
5
5
Standard
Auto
Fax Start Press
Contrast
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Use Light when sending a light document.
Use Dark when sending a dark document.
a
Press (Fax).
b
Press a or b to choose Contrast.
c
Press d or c to choose Auto, Light or
Dark.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a colour fax.
• When you choose Photo as the Fax
Resolution.
Sending a fax
5
5
35