Changing the remote codes
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 5 1. The preset
Remote Deactivation Code is # 5 1. If you
want to, you can replace them with your own
codes.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose Remote Codes.
e
Press d or c to choose On.
Press OK.
f
Do one of the following:
If you want to change the Remote
Activation Code, press a or b to
choose Act.Code:.
Enter a new Remote Activation Code.
Press OK.
If you want to change the remote
Deactivation Code, press a or b to
choose Deact.Code:.
Enter a new Remote Deactivation
Code.
Press OK.
g
Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, l, #.
• Remote Codes might not work with some
telephone systems.
Telephone and External devices
7
7
53