Changing Copy Quality; Enlarging Or Reducing The Image Copied - Brother MFC-230C User Manual

Chapter 10

Changing copy quality

You can choose from a range of quality
settings. The default setting is Normal.
To temporarily change the quality setting,
follow the instruction below:
Press Normal Normal is the
Fast
Best
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options and a or b to
choose Quality.
Press OK.
e
Press a or b to choose Normal, Best
or Fast. Press OK.
f
Press Black Start or Color Start.
52
10
recommended
mode for ordinary
printouts. This
produces good copy
quality with good
copy speed.
Fast copy speed
and lowest ink
consumption. Use to
save time printing
documents to be
proof-read, large
documents or many
copies.
Use best mode to
copy precise images
such as
photographs. This
provides the highest
resolution and the
slowest speed.
.
To change the default setting, follow the
instruction below:
a
Press Menu, 3, 1.
1.Quality
b
Press a or b to choose Normal, Best
or Fast. Press OK.
c
Press Stop/Exit.
Enlarging or reducing the
image copied
You can choose the following enlargement or
reduction ratios:
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
Auto sets the machine to calculate the
reduction ratio that best fits the size of paper.
Press
Custom(25-400%)
200%
198% 4"x6"iA4
186% 4"x6"iLTR
and then a or b to
choose
142% A5iA4
Enlarge/Reduce
104% EXEiLTR
100%
97% LTRiA4
93% A4iLTR
83%
78%
69% A4iA5
50%
To enlarge or reduce the next copy follow the
instruction below:
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
10
.