Storing A Pause; Storing Speed Dial Numbers; Changing Speed Dial Numbers; Setting Up Groups For Broadcasting - Brother MFC-230C User Manual

Storing a pause

Press Redial/Pause to put a 3.5-second
pause between numbers. If you are dialing
overseas, you can press Redial/Pause as
many times as needed to increase the length
of the pause.

Storing Speed Dial numbers

You can store up to 40 2-digit Speed Dial
locations with a name. When you dial you will
only have to press a few keys (For example:
Speed Dial, OK, #, the two-digit number,
and Black Start or Color Start).
a
Press Speed Dial and a or b to
choose Set Speed Dial.
Press OK.
b
Use the dial pad to enter a 2-digit
Speed-Dial location number (01-40).
Press OK.
c
Enter the fax or telephone number
(up to 20 digits).
Press OK.
d
Do one of the following:
Enter the name (up to 16 characters)
using the dial pad.
Press OK. (To help you enter letters,
see Entering Text on page 112.)
To store the number without a name,
press OK.
e
Do one of the following:
To store another Speed Dial number,
go to step b.
To finish the setting, press
Stop/Exit.
Changing Speed Dial
8
numbers
If you try to store a Speed Dial number where
a number has already been stored, the LCD
will show the name or number that has been
stored there, and will ask you to do one of the
following:
Press 1 to change the stored number.
8
#05:MIKE
1.Change
Press 2 to exit without making a change.
If you chose 1, you will be able to change the
stored number and name, or enter a new one.
Follow the instructions below:
a
Enter a new number. Press OK.
b
Enter a new name. Press OK.
To change a character, use d or c to
position the cursor under the character
you want to change, then press
Clear/Back. Re-enter the character.
Setting up groups for
broadcasting
If you regularly want to send the same fax
message to many fax numbers you can set
up a Group. Groups are stored on a Speed
Dial number. Each group uses up a Speed
Dial location. You can then send the fax
message to all the numbers stored in a group
just by entering a Speed Dial number, and
then pressing Black Start.
Before you can add numbers to a Group, you
need to store them as Speed Dial numbers.
You can have up to six small Groups, or you
can assign up to 39 numbers to one large
Group.
a
Press Speed Dial and a or b to
choose Setup Groups.
Press OK.
Dialing and storing numbers
2.Exit
8
8
8
45