Volume Settings; Ring Volume; Beeper Volume; Speaker Volume - Brother MFC-230C User Manual

Volume Settings

Ring Volume

You can choose a range of ring volume
levels, from High to Off.
While in Fax mode
to adjust the volume level. The LCD
c
shows the current setting, and each key
press will change the volume to the next level.
The machine will keep the new setting until
you change it.
You can also change the volume through the
menu, by following the instructions below:
Setting the Ring Volume from the
menu
a
Press Menu, 1, 4, 1.
b
Press a or b to choose Low, Med,
High or Off.
Press OK.
c
Press Stop/Exit.

Beeper Volume

When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a
Press Menu, 1, 4, 2.
b
Press a or b to choose Low, Med,
High or Off.
Press OK.
c
Press Stop/Exit.
3
3
, press d or
3
3

Speaker Volume

You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu, 1, 4, 3.
b
Press a or b to choose Low, Med,
High or Off.
Press OK.
c
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook.
a
Press Hook.
b
Press d or c
This setting will stay until you change it
again.
c
Press Hook.
General setup
3
.
19
3