Changing Copy Speed And Quality; Enlarging Or Reducing The Image Copied - Brother MFC-3360C User Manual

Chapter 12
Changing copy speed and
quality
You can choose from a range of quality
settings. The default setting is Normal.
To temporarily change the quality settings,
follow the instructions below:
Press
Normal
and a or b
to choose
Quality
Fast
Best
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
Press Copy Options and a or b to
choose Quality.
Press OK.
d
Press a or b to choose Normal, Fast
or Best. Press OK.
e
Press Mono Start or Colour Start.
58
12
Normal is the
recommended mode
for ordinary printouts.
This produces good
copy quality with good
copy speed.
Fast copy speed and
lowest ink
consumption. Use to
save time printing
documents to be proof-
read, large documents
or many copies.
Use best mode to copy
precise images such
as photographs. This
provides the highest
resolution and the
slowest speed.
.
To change the default setting, follow the
instructions below:
a
Press Menu, 3, 1.
1.Quality
b
Press a or b to choose Normal, Fast
or Best. Press OK.
c
Press Stop/Exit.
Enlarging or reducing the
image copied
You can select the following enlargement or
reduction ratios:
Custom(25-400%) allows you to enter a
ratio from 25% to 400%.
Press
Custom(25-400%)
200%
198% 10x15cmiA4
186% 10x15cmiLTR
and a or b to 142% A5iA4
choose
104% EXEiLTR
Enlarge/Reduce
100%
97% LTRiA4
93% A4iLTR
83% LGLiA4
78% LGLiLTR
69% A4iA5
50%
To enlarge or reduce the next copy follow the
instructions below:
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options and
a or b to choose Enlarge/Reduce.
Press OK.
12
.