Making Copies; Copy Options; Stop Copying; Changing Copy Speed And Quality - Brother DCP-J172W Advanced User's Manual

3

Making copies

Copy options

You can change the copy settings temporarily
for the next copy.
The machine returns to its default settings
after being idle for one minute.
To change a setting, press Copy, press
Options, and then press s or t on the
Touchpanel to scroll through the copy
settings. When the setting you want is
displayed, press it and choose your preferred
option.
When you are finished choosing settings,
press Mono Start or Colour Start.
NOTE
You can save some of the settings you
use most often by setting them as the
default settings. These settings will
remain until you change them again. (See
Setting your changes as a new default
on page 11.)

Stop copying

To stop copying, press
3
3
.
Changing copy speed and
quality
You can choose different settings to change
the speed and quality of your copies. The
factory default is Normal.
If you choose Normal, you can only choose
Plain Paper in Paper Type.

Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.

Best
Use Best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a
Load your document.
b
Press (Copy).
c
Enter the number of copies you want.
d
Press Options.
e
Press s or t on the Touchpanel to
display Quality.
f
Press Quality.
g
Press Normal or Best.
h
Press OK.
i
If you do not want to change additional
settings, press Mono Start or
Colour Start.
j
Press .
3
3
3
5