Uniden WDECT2300 Series Quick Start Manual page 24

All manuals and user guides at all-guides.com
UP349BH (WDECT2300) ENG OM 1/5/05
Setting the Dial Mode (Australia only)
1) Enter the Global Setup menu, and then the Dial Mode
submenu (see "Entering the Menu" on page 13).
2) Press
select, Tone or Pulse (the initial setting is Tone).
3) Press
Copy Phonebook
1) Enter the Global Setup menu, and then the Copy
Phonebook submenu (see "Entering the Menu" on
page 13).
• If you receive a call
2) Press
or set up the Global
Memory or All Memory, and then press
Setup menu, the
transfer will
If you choose All Memory, go to step 4.
be canceled.
3) Press
• If an error occurs,
phonebook location you want to export, and then press
the phonebook
4) Press
locations transferred
phonebook locations, and then press
before the error were
stored in the
receiving handset.
If you choose All Memory in the step 2, Are you sure? appears.
Unavailable
Press
appears on
the display.
The phonebook locations will be transferred to the handset. On the receiving handset,
• When the memory of
Receiving and the handset name appear. When the transfer complete, Done!
the receiving handset
Not
is full,
appears on the handset.
enough memory
in Receiving
Handset
appears.
You cannot transfer
the phonebook
location.
[ 18 ]
1:18 PM Page 18
/vol/ or /vol/ to change the
. You will hear a confirmation tone.
/vol/ or /vol/ to choose One
/vol/ or /vol/ , or the number keypad (0-9) to select the
/vol/ or /vol/ to select the handset to which you want transfer the
/vol/ or /vol/ to select Yes, and then press
Dial Mode
Tone
Pulse
Copy Phonebook
One Memory
All Memory :xxx
.
.
.
.