Uniden WDECT2300 Series Quick Start Manual page 20

All manuals and user guides at all-guides.com
UP349BH (WDECT2300) ENG OM 1/5/05
Room Monitor
Using Room Monitor
1) Enter the Room Monitor menu (see "Entering the
Menu" on page 13).
To Room Monitor appears.
This is an example, if
2) Select the handset you want to monitor by using
you have handset #1
and #2.
3) Press
RoomMonitor appears, and you hear sounds in the
room where the handset is installed.
4) To finish the Room Monitor, press
handset to the cradle.
Handset Setup
Programming your Voice Mail Access Number
1) Enter the Handset Setup menu, and then the Edit
Voice Mail submenu (see "Entering the Menu" on page
13). Edit V_mail No. appears.
2) Enter your personal access number using the number keypad (0-9),
3) Press
To delete the current Voice Mail Access Number, delete all numbers in step 2
using
[ 14 ]
1:18 PM Page 14
/vol/ or /vol/ .
.
or return the
, , /del, or
. You will hear a confirmation tone.
/del and .
To Room Monitor
Handset #2
RoomMonitor
Handset #2
Edit V_mail No.
1234567890
redial/pause (up to 20 digits).