Initial Setup; Getting Started; Setting The Dialling Mode (Tone/Pulse); Setting The Date And Time - Brother FAX-8350P Owner's Manual

4
C H A P T E R
Initial
Setup

Getting Started

Setting the Dialling Mode (Tone/Pulse)

Your machine is initially set to TONE. If you are using a PULSE dial
line, you can change the setting to PULSE by following the steps below.
1
2
3
4

Setting the Date and Time

Your machine displays the date and time, and prints it on every fax you
send.
In the event of a power failure, the machine maintains date and time
information for about 9 hours. All other settings remain unaffected.
F O U R
For the FAX-8350P, Press Menu, 1, 1.
For the MFC-9650/FAX-8750P, Press Menu, 1, 1, 1.
The screen prompts you to select TONE or PULSE.
DIALLING:TONE
SELECT { } & SET
DIALLING:PULSE
SELECT { } & SET
Use or to select the dialling mode.
Press Set when the screen displays the dialling mode you want.
Press Stop to exit.
31