Fax Forwarding; Programming A Fax Forwarding Number; Changing The Remote Access Code - Brother FAX-8350P Owner's Manual

80
C H A P T E R N I N E

Fax Forwarding

See
"Changing
the Fax
Forwarding
number"
in this
chapter

Changing the Remote Access Code

You cannot use Fax Forwarding when "Fax Storage" is set to OFF.

Programming a Fax Forwarding Number

When Fax Forwarding is set to ON and the machine has finished
receiving a fax in memory, it dials the fax number you've programmed,
and forwards the fax message.
1
For the FAX-8350P, Press Menu, 8, 1.
For the MFC-9650/FAX-8750P, Press Menu, 1, 8, 1.
2
Press or to select ON (or OFF).
FAX FWD:ON
SELECT { } & SET
3
Press Set. The screen prompts you to enter the number of the fax
machine where faxes will be forwarded.
FWD#:
ENTER & SET
4
Enter the forwarding number (up to 20 digits).
5
Press Set.
6
Press Stop to exit.
You can also dial into your machine from a remote location to switch this
feature on, or to change the number you want your faxes forwarding to.
Enter your Remote Access Code when the fax machine picks up your
call, so you can access features remotely. The access code is preset to
1 5 9 , but you can change this.
1
For the FAX-8350P, Press Menu, 8, 3.
For the MFC-9650/FAX-8750P, Press Menu, 1, 8, 3.
2
Enter a three-digit number from 000 to 998. The
changed. Do not use the same digits that appear in your Remote
Activation or Deactivation Code.
3
Press Set.
4
Press Stop to exit.
cannot be