Restore User Defaults - Nokia NSB-7 Series Service Manual

NSB-7
Service Software Instructions
This command is used to get SCM and user settings from phone to file and vice versa.
Following information is loaded/saved with this dialog: all user settings, graphical/text
wake up message, SCM, alarms, calendar items and CLI logos and groups. Only values of
supported features are saved or loaded. Also SCM in SIM is not saved or loaded.
When data is written or read phone waiting dialog is showed to user.
Dialog mode: modal
SCM & User Settings dialog box has following items:
File Name edit field (ALT+F):
User can edit file name or select file with Open File dialog. When dialog is opened, it
contains name of the previously saved or loaded file.
Write Phone button (ALT+W):
Loads settings from file and writes them to phone.
Read Phone button (ALT+R):
Reads settings from phone and writes them to file.
Select File button (ALT+S):
Opens Open File dialog, with which user can select the file, that contains the data to
be loaded to ME or file to which data is saved from ME. If user selects OK button, the
name of selected file is copied to File Name edit field.
Close button (ESC):
Closes the dialog box.
Restore User Defaults... command
Activation
Page 80
Status Bar Text
ãNokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 1 06/00