Nokia NSB-7 Series Service Manual page 140

NSB-7
Service Software Instructions
Dialog is closed and tuning is not saved to phone.
When calibration is ended, the DAC value checking is made and if it is not successful,
error message is shown.
When exit is made, the next selections are set to the values which were selected before
this adjustment.
Operation Mode
Update RF Information window
The exit and the use of AGC-control values is done same way as exit from power level
tuning and power coefficient use:
Page 34 ãNokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 1 06/00