Siemens SIMOTICS CONNECT 400 Manual page 83

6 Commissioning the Router Kit WLAN / LAN
6.5 Configuring the SCALANCE W774-1
128. In the "AP" tab, set the channel from a channel plan.
Note
Setting the channel plan
Create a plant-specific channel plan. You need knowledge relating to WLAN for this.
Channel selection
Only specific channels are available depending on the selected user country. This must
be taken into consideration in the SCALANCE setting; otherwise, SIMOTICS
CONNECT 400 will not be available in the WLAN.
Figure 6-29
129. In the "AP" tab, enter the desired WLAN name next to the port setting under "SSID".
Application example for SIMOTICS CONNECT 400 - Router KitInbetriebnahme- und Montagehandbuch
Selecting the channel
83