Siemens SIMOTICS CONNECT 400 Manual page 30

4 Installing Router Kit components in the installation enclosure
4.4 Installing the Router Kit WLAN / LAN in the installation enclosure
23. Pull the cables through the pre-drilled holes at the bottom and secure the cable glands
with the locknuts.
Figure 4-20
24. Wire the elements as shown in the terminal connection diagram.
Figure 4-21
Blue frame
Red frame
Green frame
Application example for SIMOTICS CONNECT 400 - Router KitInbetriebnahme- und Montagehandbuch
Attached cable glands
Terminal connection diagram
Wiring of 24 V supply voltage of SITOP compact 24V/1.3A
to SCALANCE W774-1
Wiring of SITOP compact 24V/1.3A with the three universal terminals
Attachment of antenna cable between SCALANCE W774-1
(connection: R1 A1, R1 A2) and the two antennas ANT792-6MN
30