Omron H8GN Manual page 9

H8GN
2. Using the H8GN as a Timer
Typical Application Examples
1. Changing Set Values
Set value and selections in each
display can be changed by pressing
the and Keys.
2. Display
No. 1 Display No. 2 Display
Typical Application Examples
Time range 0.0 to 999.9 s
Timer mode DOWN (remaining time)
Output mode A mode
Output time Hold
Input signal width 20 ms
Setup Procedure
Power ON
Operation Level
Initial Setting Level
Set Counter/Timer Use the
Keys to select the timer
selection
function.
Use the
Set time range
Keys to set the time range to
999.9 s
Check timer mode Use the
Keys to set the timer mode to
remaining time.
Check output mode Check the output mode.
Check output time Check the output time.
Check input signal Check the input signal width.
width
Operation Level
Use the
Set SV
Keys to set the SV to 10.0.
Press the
Reset PV
Start operation
Confirming Set Values
Set values are effective two seconds after key operation is stopped or when the
or Key is pressed.
Power ON
Present value (PV)/
set value (SV)
and
Function:
and
Time range:
and
Timer mode:
Output mode:
Output time:
Input signal width:
and
PV/SV:
Key.
PV:
Operate
H8GN
Press the Level Key for at
least 3 s. Operation stops.
Press the Level Key for at
least 1 s. Operation starts.
11