Starting The Scsiselect Utility Program (Some Models) - IBM IntelliStation M Pro 6218 Problem Determination And Service Manual

Starting the SCSISelect Utility program (some models)

To start the SCSISelect Utility program, complete the following steps:
1. Turn on the computer.
2. When the <<< Press <CTRL><A> for SCSISelect Utility! >>> prompt appears,
3. Use the arrow keys to make the selection, and press Enter.
4. When the Would you like to configure the SCSI controller or run the
5. Use the arrow keys to make the selection, and press Enter.
6. Follow the instructions on the screen to change the settings of the selected
134
IBM IntelliStation M Pro Type 6218 and 9236: Problem Determination and Service Guide
press Ctrl+A. If you have set an administrator password, you are prompted to
type the password.
SCSI disk utility? prompt appears, make the selection, and press Enter.
items, and press Enter.