Wiring Of Sensor Connector (E-Con) - Mitsubishi Electric NZ2GN2S1-16D User Manual

Wiring of sensor connector (e-CON)

Applicable connector
The following table lists reference products of sensor connectors (e-CON).
Model Manufacturer
ECN-M014R Mitsubishi Electric System & Service Co., Ltd.
ECN-M024Y
ECN-M034OR
ECN-M044GN
ECN-M054BL
ECN-M064GY
Signal name and wiring
For the signal names of the terminal block and wiring of the external device, refer to the specifications of each module. (
Page 21 Performance Specifications)
Incorrect wiring can cause malfunction of or damage on the module.
Wiring method
For how to wire the sensor connectors (e-CON), refer to the catalogs of each manufacturer.
Specifications
Applicable cable Applicable cable
(core wire size) (outer diameter)
0.8 to 1.0mm
0.14 to 0.30
(26 to 24 AWG)
1.0 to 1.2mm
1.2 to 1.6mm
1.0 to 1.2mm
0.30 to 0.50
(22 to 20 AWG)
1.2 to 1.6mm
1.6 to 2.0mm
6.9 Wiring of I/O Module and External Device
Color of the
cover
Maximum
rated current
2.0A Red
Yellow
Orange
Green
Blue
Gray
6 INSTALLATION AND WIRING
6
145