Table of Contents
Advertisement
1
Listing and Code Approvals
A. Appliance Safety Certification
Model
SANTAFEI-C
Number:
Laboratory: OMNI Test Laboratories, Inc.
Report
061-S-77d-6.2
Number:
Solid Fuel Room Appliance/Pellet Fuel
Type:
Burning Type Insert
ASTM E1509-2004 and ULC S628-93
Room Appliance Pellet Fuel Burning
Standard
Type and (UM) 84-HUD,
Mobile Home Approved
B. Appliance Emissions Certification
Model
SANTAFEI-C
Number:
Laboratory OMNI Test Laboratories, Inc.
Report
0061PM077E
Number:
EPA method 28R, ASTM 2779 and ASTM
Standard:
E1509-2004
Can be found at:
www.quadrafire.com/about-us/epa-certification
This pellet insert needs periodic inspection and repair for proper operation. It is against federal regulations to operate this
pellet insert in a manner inconsistent with operating instructions in this manual.
NOTICE: This installation must conform with local codes. In the absence of local codes you must comply with the
ASTM E1509-2004, ULC S628-93, ASTM 2779, and (UM) 84-HUD.
6
The SANTAFEI-C is Certified
to comply with 2020 particulate
emission standards.
7019-802H
C. BTU & Efficiency Specifications
EPA Certification
Number:
EPA Certified Emissions: 1.1 grams per hour
*LHV Tested Efficiency: 70.4%
**HHV Tested Efficiency: 66.1%
***EPA BTU Output: 5,800 to 22,400 / hr.
****BTU Input: 9,300 to 30,600 / hr.
Vent Size: 3" or 4" Type "L" or "PL"
Hopper Capacity: 45 lbs.
Fuel Premium Wood Pellets
* Weighted average LHV (Low Heating Value) efficiency
using data collected during EPA emissions tests in
accordance with the requirements of CSA B415.1.
** Weighted average HHV (High Heating Value) efficiency
using data collected during EPA emissions tests in
accordance with the requirements of CSA B415.1.
*** A range of BTU outputs calculated using HHV
efficiency and the burn rates from the EPA tests.
**** Based on the maximum feed rate per hour multiplied
by approximately 8600 BTU's which is the average BTU's
from a pound of pellets.
Number: 175-19
04/21
Advertisement
Table of Contents
