Table of Contents
Advertisement
1 1
Listing and Code Approvals
A. Appliance Certification
Model
4300 Step Top
Number:
HRL Technology, Australian Solid Fuel
Laboratory:
Testing
Report No: HCMG/12/016
Softwood and Hardwood only at 25%
Type:
dry basis
Standard: AS/NZS 2918:2001
B. BTU & Efficiency Specifications
Overall Average Efficiency
Burning Softwood
(AS/NZS 4012)
Overall Average Efficiency
Burning Hardwood
(AS/NZS 4012)
Average Particulate Emission
Factor Burning Softwood
(AS/NZS 4013)
Average Particulate Emission
Factor Burning Hardwood
(AS/NZS 4013)
Maximum Average Heat Output
Burning Softwood
Maximum Average Heat Output
Burning Hardwood
Vent Size: 6 inches
Firebox Size: 2.3 cubic feet
Recommended Wood Length: 18 inches
Fuel Orientation: Front-to-Back
Approved Fuel
NOTE: Hearth & Home Technologies, manufacturer of
this appliance, reserves the right to alter its products,
their specifications and/or price without notice.
The Quadra-Fire 4300 Step Top Wood Appliance is
Hardwood and Softwood Certified. Hardwood Particulate
Emissions equaling 1.0 g/kg with a Space Heating Efficiency
of 64%. Softwood Particulate Emissions equaling 0.4 g/kg
with a Space Heating Efficiency of 71%.
This wood appliance needs periodic inspection and repair
for proper operation. It is against federal regulations to
operate this wood appliance in a manner inconsistent with
operating instructions in this manual.
8
71%
64%
0.4 g/kg
1.0 g/kg
10kW
12.0kW
Wetbacks are NOT
an approved option
Wetback
and must NOT be
fitted.
Softwood and
Hardwood only with a
Moisture content less
than 25% (dry basis)
C. Glass Specifications
This appliance is equipped with 5mm ceramic glass.
Replace glass only with 5mm ceramic glass. Please contact
your dealer for replacement glass.
Fire Risk.
Hearth & Home Technologies disclaims any
responsibility for, and the warranty will be
voided by, the following actions:
• Installation and use of any damaged appliance.
• Modification of the appliance.
• Installation other than as instructed by Hearth & Home
Technologies.
• Installation and/or use of any component part not
approved by Hearth & Home Technologies.
• Operating appliance without fully assembling
all components.
• Operating appliance without legs attached (if supplied
with appliance).
• Do NOT Over fire - If appliance or chimney connector
glows, you are over firing.
Any such action that may cause a fire hazard.
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage.
For assistance or additional information, consult a qualified
installer, service agency or your dealer.
7037-807C
WARNING
02/23
Advertisement
Table of Contents
