Calling An Attendant Console (Ac); Direct Communication Call - Siemens HiPath 1100 User Manual

Step by step

Calling an attendant console (AC)

An attendant console can be called at any time for mak-
ing a call or simply for consultation.
n
Lift the handset.
m
Enter the code for calling the attendant console.(9)
w
Wait for the call to be answered.
s
Start conversation.

Direct communication call

This features enables sending voice messages to sys-
tem telephones using the speakerphone). A message
can be sent to an extension or a Call group (CG).
When a message is sent, the called party hears a warn-
ing signal before the message is played and the display
shows the caller's name and number.
Required: Destination number uses a Profiset 3030 or
an optiPoint with a speakerphone telephone.
n
Lift the handset.
qld
Enter the code for direct messaging. (*80)
p
Enter an extension or Call group (CG) (for example: 11/
101 or 770).
s
Record the message.
Answer the call
n
Lift the handset.
s
Start conversation.
[1] When no extension is programmed as an attendant and "9" is en-
tered, a busy signal is heard.
Functions used when making calls
1
27