3. Disassembly and Reassembly
3-9 Replacing the Assy Lamp Bulb
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing . Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation .
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Assy Lamp
Bulb
This document can not be used without Samsung's authorization.
Explanation Photo
21
Explanation
1. Turn off the electrical supply going
to the range .
2. Shut off the gas shut-off valve in
the gas supply line to the range .
3. Remove the rear cover panel .
4. Open the oven door and remove
the racks from inside the oven .
5. The oven lamp bulb is in the
upper right-hand corner of the
oven cavity . Turn oven lamp cover
counterclockwise to loosen and
remove the cover .
6. Remove the oven light bulb .
7. When service is complete, Install
the bulb and light cover by turning
clockwise .